www.pulseeng.com 1 g002.l (9/10) surface mount common mode chokes suited for lan and telecom applications reduces radiated emi emissions filters common mode noise for emi reduction common mode attenuation from 100 khz to 1 ghz peak solder temperature ratings per table 5-2 in ipc/jedec j-std-020 16 34 pe-68624nl weight ............. 0.17 grams tape & reel ........... 1500/reel tube .................. 85/tube usa 858 674 8100 ? germany 49 7032 7806 0 ? singapore 65 6287 8998 ? shanghai 86 21 32181071 ? china 86 755 33966678 ? taiwan 886 3 4643715 electrical specifications @ 25c part number no. of ports primary inductance ocl (h min) common mode attenuation (db typ) dcr ( w max) page number mech & schem 100 khz 1 mhz 10 mhz 30 mhz 50 mhz 100 mhz 300 mhz 500 mhz 1 ghz pe-68624 nl 2a 2 47 11 27 40 44 42 36 26 17 0.40 2 pe-65855 nl 2a 2 4700 41 43 49 39 34 26 20 20 12 1.0 4 pe-65857 nl 2a 4 22.5 7 20 30 37 38 34 24 13 0.22 4 pe-68627 nl 2a 4 24 8 21 32 36 37 36 30 20 0.25 4 pe-65854 nl 2a 4 47 3 19 32 36 35 29 12 6 0.40 3 pe-67540 nl 2a 4 100 14 33 44 48 49 44 34 29 20 0.60 4 t8008 nl 2a 16 47 7 27 40 44 42 36 26 0.40 6 1. for tape & reel packaging, add suffix t to the end of the part number e.g. t8008nlt 2. msl = moisture sensitivity level a=1 b=2 c=3 d=4 mechanical schematic www.pulseeng.com
8 5 1 4 da te code count ry of origi n .340 8,64 max .285 7,24 .100 2,54 .360 9,14 max suggested pad layout .300 7,62 .100 2,54 .270 6,86 .070 1,78 .050 1,27 .098 2,50 max .004/0,100 8 surfaces www.pulseeng.com 2 g002.l (9/10) surface mount common mode chokes suited for lan and telecom applications weight .......... 0.3 grams tape & reel ....... 1500/reel tube .............. 60/tub e dimensions: inches mm unless otherwise specified, all tolerances are .010 0,25 pe-65854nl pe-65855nl pe-65857nl, pe-67540nl pe-68627nl usa 858 674 8100 ? germany 49 7032 7806 0 ? singapore 65 6287 8998 ? shanghai 86 21 32181071 ? china 86 755 33966678 ? taiwan 886 3 4643715 27 45 36 18 ?? ?? weight ......... 0.69 grams tape & reel ....... 800/reel tube ............. 40 /tube dimensions: inches mm unless otherwise specified, all tolerances are .010 0,25 weight .............. 2.0 grams tape & reel ........... 250/reel tube .................. 40/tube 3 6 4 5 1 8 2 7 pe-65857 3 6 4 5 1 8 2 7 pe-67540 dimensions: inches mm unless otherwise specified, all tolerances are .010 0,25 weight .......... 0.3 grams tape & reel ...... 1500/reel tube .............. 55/tube 8 5 1 4 da te code count ry of origin .345 8,76 max .285 7,24 .100 2,54 suggested pad layout .300 7,62 .100 2,54 .270 6,86 .070 1.78 .050 1,27 max .355 9,02 .207 5,26 max .004/0,100 8 surfaces 3 6 4 5 1 8 2 7 dimensions: inches mm unless otherwise specified, all tolerances are .010 0,25
nl note: the common mode test circuit for surface mount is the same as for through hole and is on the back page. dimensions: inches mm unless otherwise specified, all tolerances are .010 0,25 weight .......... 4.0 grams tape & reel ....... 250/reel tube .............. 15/tube t8008 ? ?? ? ?? ? ?? ? ?? ? ?? ? ?? ? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? t8008nl surface mount common mode chokes suited for lan and telecom applications www.pulseeng.com 3 g002.l (9/10) usa 858 674 8100 ? germany 49 7032 7806 0 ? singapore 65 6287 8998 ? shanghai 86 21 32181071 ? china 86 755 33966678 ? taiwan 886 3 4643715 mechanical schematic
through hole common mode chokes suited for lan and telecom applications www.pulseeng.com 4 g002.l (9/10) hp 3577a network analyzer 50 w 50 w d.u.t . test notes: 1. network analyzer calibrated to compensate for 50 w resistors. 2. all windings on a core are connected in parallel for the test. 3. for multi-core chokes, test data is for one core only. the windings on the other core(s) are left unconnected (i.e. open). common mode test circuit for surface mount and through hole for more information: pulse worldwide headquarters 12220 world trade dr. san diego, ca 92128 u.s.a. www.pulseeng.com tel: 858 674 8100 fax: 858 674 8262 pulse south asia 135 joo seng rd. #03-02 pm industrial bldg. singapore 368363 tel: 65 6287 8998 fax: 65 6280 0080 pulse north asia no. 26, kao ching rd. yang mei chen taoyuan hsien taiwan r. o. c. tel: 886 3 4643715 fax: 886 3 4641911 pulse china headquarters b402, shenzhen academy of aerospace technology bldg. 10th kejinan rd. high-tech zone nanshan district shenzen, pr china 518057 tel: 86 755 33966678 fax: 86 755 33966700 pulse north china room 1503 xinyin building no. 888 yishan rd. shanghai 200233 china tel: 86 21 54643211/2 fax: 86 21 54643210 pulse europe einsteinstrasse 1 d-71083 herrenberg germany tel: 49 7032 7806 0 fax: 49 7032 7806 135 performance warranty of products offered on this data sheet is limited to the parameters specified. data is subject to change without notice. other brand and product names mentioned herein may be trademarks or registered trademarks of their respective owners. ? copyright, 2009. pulse engineering, inc. all rights reserved.
|
